Rotating Torque Sensors with Slip Rings

By default, rotating torque transducers with slip rings sent an analog, unamplified strain gauge bridge output signal in mV/V, which is transmitted via high-quality, low-wear slip rings. Slip ring sensors are generally used for individual, random inspections or torque measurements, performed at low speed. An integrated speed/angle measurement is standardized in most torque sensors with slip ring transmission. Typical applications for this type of sensor are for example screw driving tech­nolo­gies, test bench applications such as testing of engines, gears, bearings and seals ... .

DR-2335

Type: DR-2335
Measuring Range: 1..20 N·m
Accuracy Class: 0.1
Mechanical Connection: ¼" Hexagon Drive / Quick Change Chuck
Speed/Angle Measurement: ✓ Standard
Suitable Connection Cable
(PDF Datasheet):

Connection cable, 3 m, with 12-pin female cable connector and free soldered ends
Connection cable, 3 m, with 12-pin female angle cable connector and free soldered ends

PDF Datasheet: 080881a_DR-2335_en.pdf
PDF Operation Manual: Download
CAD Files: DXF
IGS; STP

Association for Sensors and Measurement AMA

Authorised Economic Operator AEOF

Quality Management ISO 9001