Weighing Electronics of Lorenz Messtechnik GmbH

Our scale electronic portfolio ranges from a relatively simple junction box to a high resolution digital weight indicator with remote control for up to 8 load cells.

Load Cells

Weighing Electronics

Analog Type Approval Description
Measuring Amplifier for Load Cells CPJ / CPJ-2S Strain Gauge Amplifier CPJ / CPJ-2S - Amplifier for Load Cells in 4- or 6-Wire Circuit
DIN Mounting Rail Device with Voltage and Current Output,
Parallel Connection of up to 4 Load Cells, Shunt Calibration Signal via Push Button,
Low- Pass Filter and Limit Value Evaluation with 2 Set Points.
Junction Box ALCJB-A Junction Box ALCJB‑A EX-Approval 4, 6 or 8 Load Cells (6- or 4-Wires Circuit)
ATEX 2014/34/EU and ICEx - Approval
Level of Protection IP65
Aluminum Housing
Junction Box ALCJB-X4 Junction Box ALCJB‑X4 EX-Approval Up to 4 Load Cells (6- or 4-Wires Circuit)
ATEX 2014/34/EU and ICEx - Approval
Level of Protection IP65
Stainless Steel Housing
Zener Safety Barrier Kit B15, B16, B19 Zener Barrier Kit B15, B16, B19 EX-Approval Zener Safety Barrier Kit, Type B15, B16 or B19; each Kit contains 3 Zener Barriers, for use of Load Cells of our Program in a intrinsically Safe Zone.
ATEX 2014/34/EU and ICEx - Approval
Compatible with SYSTEX / ATEX certified Systems
Junction Box DLCJB-A Junction Box DLCJB‑A - Connection of up to 8 Digital Load Cells with RS485-Output
Level of Protection IP65, Over-Voltage Protection
Aluminum Housing
Digital Type Approval Technical Details
Measuring Amplifier for Load Cells ENOD4-T DIN Digital Strain Gauge Amplifier ENOD4‑T DIN OIML-Approval Digital Measuring Amplifier for Strain Gauge Sensors in 4- or 6-Wire Technology for DIN Rail Mounting, certified according to OIML R76, with Digital Inputs and Outputs, Voltage Output or Current Output, 8 parallel Sensor Connections, parameterizable Digital Filters, RS485 Interface, USB Port for Parameterization via PC, Dual Port EtherNet for PLC Connection and Communication Protocols Modbus-TCP, Profinet, Ether-CAT or EtherNet/IP.
Digital Weighing Indicator IPE50 Panel Digital Weighing Indicator IPE50 Panel OIML-Approval OIML-Approval
Connection of up to 8 Load Cells
Output: RS485, RS232, PROFIBUS DP in Option
Digital Weighing Indicator IPE50 DIN Digital Weighing Indicator IPE50 DIN OIML-Approval OIML-Approval
DIN Mounting Rail Device
Connection of up to 8 Load Cells
Output: RS485, RS232, PROFIBUS DP in Option
Digital Weighing Indicator IPC50 Digital Weighing Indicator IPC50 OIML-Approval OIML-Approval
Connection of up to 8 Load Cells
RS485, RS232, Remote Control
ABS- Housing

Association for Sensors and Measurement AMA

Authorised Economic Operator AEOF

Quality Management ISO 9001